Genzler Bass Array Series BA2-115-3SLT

The innovative SERIES 2 Bass Array design blends the benefits of all Italian-designed speakers -- a 15" neodymium woofer in a vented bass reflex design with the performance and pattern control of a 4 x 3" neodymium cone-driver line array element. Additionally, the placement of the Line Array in front of the 15" woofer further provides a type of "single point source" projection---think of it as concentric speakers, one inside of the other, in the same linear plane. Also due to line array principles the all-important mid and high frequencies have a much wider horizontal dispersion with a more controlled vertical pattern.

The benefits of combining both loudspeaker elements in an extremely compact speaker system are exponential for the player:

- Full, deep, low frequency response from the high efficiency 15" ported woofer.

- Smooth, seamless, clear, and articulate mid-range to high frequency transition across the audio spectrum.

- Broad horizontal dispersion far exceeding conventional woofer/tweeter combinations.

What this means in the context of performance is the most focused, defined, musically smooth and seamless response possible throughout the cabinet's entire broad-range bandwidth.

An excellent choice when used as a single enclosure or in combination with additional BA straight or slant cabinets. This offers multiple options to the player to configure their BA2-115-3 SLT stack for the best coverage of the stage or performance venue.

Features:

- Neodymium 15" Woofer w/4 x 3" Neodymium Line Array Drivers

- Ported Cabinet Design

- Cabinet Built w/Lite-ply & Baltic Birch Plywood

- Side Recessed Flush Handles

- Dual Speakon(R) and 1/4" Input Jacks

Specs:

-Power Handling: 500 Watts

-Frequency Response: 30-18K Hz

-Sensitivity 1W/1M: 99 dB

-Nominal Impedance: 8 ohm

-Crossover Frequency: 800 Hz

-Weight: 36 lbs

-Dimensions (HxWxD): 17.5" x 23" x 19 3/8"

-Shipping Data:

-Carton Dimensions: 27"H x 22"W x 22"D

-Shipping Weight: 43 Lbs

-Speaker Components:

- One -- Premium Neodymium 15" loudspeaker utilizing a fiberglass former voice coil with a unique dual-wound (inside/outside winding) design for increased power handling and thermal capacity.

- Four -- Premium Neodymium 3" full-range, mid/high cone drivers utilizing a fiberglass former voice coil, a unique dual-wound (inside/outside winding) design for increased power handling and thermal capacity. These drivers are loaded into a sealed line array stack.

-Input Panel/Crossover Network:

- Custom designed 6 dB/octave slopes in balance with the acoustical controls of each enclosure.

- Two -- Speakon(R) NL-2 connector and two - ?xBC" sealed jacks; to reduce rear cabinet air loss and noise.

-Cabinet Finish:

- Heavy-duty textured black vinyl

- Black metal corners and side-mounted recessed handles

- Custom, curved grille with a unique center "pleat" to protect the array column

- Large rubber feet

 
Thanks for shopping with BME!!